S13-M-10KV Fully Sealed Oil-immersed Distribution Transformer

Home > Product > Transformer > Oil-immersed Transformer > S13-M-10KV Fully Sealed Oil-immersed Distribution Transformer

S13-M-10KV Fully Sealed Oil-immersed Distribution Transformer

S13-M series three-phase oil-immersed distribution transformer is a national science and technology new product, which is developed on the basis of the structure design of the new S9 series products. The leading idea of the design is to meet the reliability of the product, improve the performance of the product, and adjust some loss coefficient and structure according to the actual situation of the new S9 products, so that the design value of the loss is more in line with the actual side value. At the same time, optimization design and reasonable determination of copper and iron ratio are carried out to make the material cost the lowest and the structure reasonable. The core adopts high magnetic conductivity, low loss and high quality and high performance silicon steel sheet, which reduces the no-load loss and no-load current.

Consult Now

Product Applications

Power plant, power system, coal and mine, transportation,etc.

Technical Parameter

Rate power (KVA) Voltage combination Connection section Loss (W) No-load Current (%) Short-circuit impedance(%)
HV voltage (k) Tapping range LV voltage (k) No-load Load (75℃)
30 6 6.3 10 10.5 11 ±5% ±2 X2.5% 0.4 Yyno Dyn11 100 600 0.80 4 4.5
50 130 870 0.75
63 150 1040 0.70
80 180 1250 0.70
100 200 1500 0.65
125 240 1800 0.65
160 270 2200 0.60
200 330 2600 0.60
250 400 3050 0.50
315 480 3650 0.45
400 570 4300 0.40
500 680 5100 0.40
630 810 6200 0.40
800 980 7500 0.40
1000 1150 10300 0.30
1250 1360 12000 0.30
1600 1640 14500 0.30
2000 2050 17500 0.50
2500 2500 21200 0.40

Features

S13-M series three-phase oil-immersed distribution transformer is a national science and technology new product, which is developed on the basis of the structure design of the new S9 series products. The leading idea of the design is to meet the reliability of the product, improve the performance of the product, and adjust some loss coefficient and structure according to the actual situation of the new S9 products, so that the design value of the loss is more in line with the actual side value. At the same time, optimization design and reasonable determination of copper and iron ratio are carried out to make the material cost the lowest and the structure reasonable. The core adopts high magnetic conductivity, low loss and high quality and high performance silicon steel sheet, which reduces the no-load loss and no-load current.

The high-voltage winding of the entire series adopts layered structure, and the low-voltage winding of 500KVA and below products is also layered structure (without segmentation and continuous). 630KVA and above products adopt new spiral type for low voltage. The body assembly summarizes the mature experience of the new S9 distribution transformer, and after the body assembly, it becomes a solid integral to ensure that the product meets the requirements of electrical performance and mechanical strength when sudden short circuit occurs.

The full sealed structure of this series of products ensures the isolation of transformer oil and external air, prevents oil aging, improves the reliability of transformer operation, and the oil tank adopts corrugated oil tank with a long hole at the top and bottom of the tank wall. It can promote the circulation of oil in corrugated sheet. This oil tank process is simple, mechanical strength is high, oil flow and heat dissipation capacity are improved, welding effect is good and leakage is not easy.

Common Questions

Q1: Are you a manufacturer or a trading company?
A: We are a direct manufacturer with over 50 years of expertise in power transformers, inductors, and reactors. Being a factory-direct supplier means you get competitive pricing, full technical support, and complete control over production quality.

Q2: What is your warranty policy?
A: We stand behind the reliability of our products with a minimum 12-month warranty. Extended warranty options are also available depending on your project requirements.

Q3: What is the lead time for mass production?
A: Our standard lead time is 7 to 25 working days, which varies based on the order quantity and customization complexity. We always strive to balance fast delivery with meticulous workmanship.

Q4: How do you ensure quality control in your factory?
A: We implement a rigorous 100% inspection system. Throughout the entire manufacturing process—from incoming raw materials to finished products—our products go through 8 dedicated QC checkpoints to guarantee zero defects and long-term operational stability.

Q5: Can you offer customized products? How do I get a tailored solution?
A: Absolutely. We specialize in fully customized designs based on your specific application and electrical parameters. Simply share your requirements, and our engineering team will provide you with the optimal solution within 48 hours.

Q6: What information do you need for a custom transformer or reactor?
A: A technical drawing is the most efficient starting point. If that’s not available, please provide your required power (capacity) rating, voltage levels, installation size limitations, insulation class, and any special environmental conditions.

Q7: How quickly can I get a price, and how do I contact you?
A: We typically issue a detailed quotation within 24 hours after receiving your inquiry. You can reach us via Email at sales@hnlsdz.com or connect with us on WhatsApp at +86 17267488565 for immediate assistance.

Send Your Inquiry

Fill in the information below, our sales manager will contact you shortly.

WhatsApp QR WeChat QR sales@hnlsdz.com
Scroll to Top