{"id":1542,"date":"2026-07-22T05:33:30","date_gmt":"2026-07-22T05:33:30","guid":{"rendered":"https:\/\/lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/"},"modified":"2026-09-26T16:23:22","modified_gmt":"2026-09-26T16:23:22","slug":"what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above","status":"publish","type":"post","link":"https:\/\/www.lstransformer.com\/es\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/","title":{"rendered":"What should be noted during the welding of leads for transformers with a voltage of 60kV and above?"},"content":{"rendered":"

What should be noted during the welding of leads for transformers with a voltage of 60kV and above?<\/h1>\n

\"indefinido\"<\/a><\/p>\n

When welding leads for transformers with a voltage of 60kV and above, the following precautions should be taken: Before welding the leads, it is essential to wrap the base of the leads to be welded with wet asbestos rope and cover the winding with tarpaulin. The welding flux should be prepared as needed, but the usage time should not exceed 8 hours. After welding, it is necessary to remove welding flux, oxide residue, insulation scorching, and any burrs. The welding area should be covered with shielding material to prevent local discharge.<\/p>\n

If the leads are bare copper bars, a layer of insulating varnish should be applied to their surface to prevent the accelerated aging of transformer oil. In addition, leads can also be connected using crimping or mechanical methods.<\/p>\n

Contacto<\/h2>\n

LuShan, est. En 1975, es un Chino fabricante profesional que se especializa en los transformadores de potencia y reactores de m\u00e1s de 50 a\u00f1os. Los productos principales son transformador monof\u00e1sico, trif\u00e1sico de transformadores de aislamiento, transformador el\u00e9ctrico, transformador de distribuci\u00f3n, el paso hacia abajo y paso transformador de baja tensi\u00f3n del transformador, transformador de alto voltaje, transformador de control, transformador toroidal, R-transformador con n\u00facleo; DC inductores, CA reactores, filtrado de reactor de l\u00ednea y de carga del reactor, estrangulaciones, el filtrado de los reactores y de los intermedios, de alta frecuencia de los productos<\/a>.<\/p>\n

Nuestros transformadores de potencia y reactores son ampliamente utilizados en las 10 \u00e1reas de aplicaci\u00f3n: rapid transit, maquinaria de construcci\u00f3n, energ\u00eda renovable, de fabricaci\u00f3n inteligentes, equipos m\u00e9dicos, la mina de carb\u00f3n de la explosi\u00f3n de la prevenci\u00f3n, el sistema de excitaci\u00f3n, de vac\u00edo, de sinterizaci\u00f3n(horno), aire acondicionado central.<\/p>\n

Saber m\u00e1s acerca de transformadores de potencia y reactores: www.lstransformer.com<\/a>.<\/p>\n

Si desea obtener soluciones personalizadas para transformadores o reactores, p\u00f3ngase en contacto con nosotros.
\nWhatsApp\uff1a+86 13787095096
\nCorreo electr\u00f3nico: marketing@hnlsdz.com<\/p>","protected":false},"excerpt":{"rendered":"

What should be noted during the welding of leads for transformers with a voltage of 60kV and above? When welding leads for transformers with a voltage of 60kV and above, the following precautions should be taken: Before welding the leads, it is essential to wrap the base of the leads to be welded with wet […]<\/p>\n","protected":false},"author":3,"featured_media":2003,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[48],"tags":[],"class_list":["post-1542","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-faq"],"yoast_head":"\nWhat should be noted during the welding of leads for transformers with a voltage of 60kV and above? - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD<\/title>\n<meta name=\"description\" content=\"When welding leads for transformers with a voltage of 60kV and above, the following precautions should be taken: Before welding the leads, it is essential to wrap the base of the leads to be welded with wet asbestos rope and cover the winding with tarpaulin. The welding flux should be prepared as needed, but the usage time should not exceed 8 hours. After welding, it is necessary to remove welding flux, oxide residue, insulation scorching, and any burrs. The welding area should be covered with shielding material to prevent local discharge.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.lstransformer.com\/es\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/\" \/>\n<meta property=\"og:locale\" content=\"es_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"What should be noted during the welding of leads for transformers with a voltage of 60kV and above? - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\" \/>\n<meta property=\"og:description\" content=\"When welding leads for transformers with a voltage of 60kV and above, the following precautions should be taken: Before welding the leads, it is essential to wrap the base of the leads to be welded with wet asbestos rope and cover the winding with tarpaulin. The welding flux should be prepared as needed, but the usage time should not exceed 8 hours. After welding, it is necessary to remove welding flux, oxide residue, insulation scorching, and any burrs. The welding area should be covered with shielding material to prevent local discharge.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.lstransformer.com\/es\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/\" \/>\n<meta property=\"og:site_name\" content=\"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\" \/>\n<meta property=\"article:published_time\" content=\"2026-07-22T05:33:30+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-26T16:23:22+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742009844872310.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"370\" \/>\n\t<meta property=\"og:image:height\" content=\"276\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"author\" content=\"369703005\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"369703005\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/\"},\"author\":{\"name\":\"369703005\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#\\\/schema\\\/person\\\/674089c15f4857c19a997f886816d289\"},\"headline\":\"What should be noted during the welding of leads for transformers with a voltage of 60kV and above?\",\"datePublished\":\"2026-07-22T05:33:30+00:00\",\"dateModified\":\"2026-09-26T16:23:22+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/\"},\"wordCount\":290,\"publisher\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/1742009844872310.webp\",\"articleSection\":[\"FAQ\"],\"inLanguage\":\"es\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/\",\"name\":\"What should be noted during the welding of leads for transformers with a voltage of 60kV and above? - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/1742009844872310.webp\",\"datePublished\":\"2026-07-22T05:33:30+00:00\",\"dateModified\":\"2026-09-26T16:23:22+00:00\",\"description\":\"When welding leads for transformers with a voltage of 60kV and above, the following precautions should be taken: Before welding the leads, it is essential to wrap the base of the leads to be welded with wet asbestos rope and cover the winding with tarpaulin. The welding flux should be prepared as needed, but the usage time should not exceed 8 hours. After welding, it is necessary to remove welding flux, oxide residue, insulation scorching, and any burrs. The welding area should be covered with shielding material to prevent local discharge.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/1742009844872310.webp\",\"contentUrl\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/1742009844872310.webp\",\"width\":370,\"height\":276},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/www.lstransformer.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"What should be noted during the welding of leads for transformers with a voltage of 60kV and above?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#website\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/\",\"name\":\"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.lstransformer.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#organization\",\"name\":\"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/cropped-7e09bd7bad9c830e0d75b8487b0d77c3-1.webp\",\"contentUrl\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/cropped-7e09bd7bad9c830e0d75b8487b0d77c3-1.webp\",\"width\":760,\"height\":202,\"caption\":\"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#\\\/schema\\\/person\\\/674089c15f4857c19a997f886816d289\",\"name\":\"369703005\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g\",\"caption\":\"369703005\"},\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/es\\\/author\\\/369703005\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"What should be noted during the welding of leads for transformers with a voltage of 60kV and above? - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD","description":"When welding leads for transformers with a voltage of 60kV and above, the following precautions should be taken: Before welding the leads, it is essential to wrap the base of the leads to be welded with wet asbestos rope and cover the winding with tarpaulin. The welding flux should be prepared as needed, but the usage time should not exceed 8 hours. After welding, it is necessary to remove welding flux, oxide residue, insulation scorching, and any burrs. The welding area should be covered with shielding material to prevent local discharge.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.lstransformer.com\/es\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/","og_locale":"es_ES","og_type":"article","og_title":"What should be noted during the welding of leads for transformers with a voltage of 60kV and above? - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD","og_description":"When welding leads for transformers with a voltage of 60kV and above, the following precautions should be taken: Before welding the leads, it is essential to wrap the base of the leads to be welded with wet asbestos rope and cover the winding with tarpaulin. The welding flux should be prepared as needed, but the usage time should not exceed 8 hours. After welding, it is necessary to remove welding flux, oxide residue, insulation scorching, and any burrs. The welding area should be covered with shielding material to prevent local discharge.","og_url":"https:\/\/www.lstransformer.com\/es\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/","og_site_name":"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD","article_published_time":"2026-07-22T05:33:30+00:00","article_modified_time":"2026-09-26T16:23:22+00:00","og_image":[{"width":370,"height":276,"url":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742009844872310.webp","type":"image\/webp"}],"author":"369703005","twitter_card":"summary_large_image","twitter_misc":{"Escrito por":"369703005","Tiempo de lectura":"2 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/#article","isPartOf":{"@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/"},"author":{"name":"369703005","@id":"https:\/\/www.lstransformer.com\/#\/schema\/person\/674089c15f4857c19a997f886816d289"},"headline":"What should be noted during the welding of leads for transformers with a voltage of 60kV and above?","datePublished":"2026-07-22T05:33:30+00:00","dateModified":"2026-09-26T16:23:22+00:00","mainEntityOfPage":{"@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/"},"wordCount":290,"publisher":{"@id":"https:\/\/www.lstransformer.com\/#organization"},"image":{"@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742009844872310.webp","articleSection":["FAQ"],"inLanguage":"es"},{"@type":"WebPage","@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/","url":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/","name":"What should be noted during the welding of leads for transformers with a voltage of 60kV and above? - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD","isPartOf":{"@id":"https:\/\/www.lstransformer.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/#primaryimage"},"image":{"@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742009844872310.webp","datePublished":"2026-07-22T05:33:30+00:00","dateModified":"2026-09-26T16:23:22+00:00","description":"When welding leads for transformers with a voltage of 60kV and above, the following precautions should be taken: Before welding the leads, it is essential to wrap the base of the leads to be welded with wet asbestos rope and cover the winding with tarpaulin. The welding flux should be prepared as needed, but the usage time should not exceed 8 hours. After welding, it is necessary to remove welding flux, oxide residue, insulation scorching, and any burrs. The welding area should be covered with shielding material to prevent local discharge.","breadcrumb":{"@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/"]}]},{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/#primaryimage","url":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742009844872310.webp","contentUrl":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742009844872310.webp","width":370,"height":276},{"@type":"BreadcrumbList","@id":"https:\/\/www.lstransformer.com\/what-should-be-noted-during-the-welding-of-leads-for-transformers-with-a-voltage-of-60kv-and-above\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/www.lstransformer.com\/"},{"@type":"ListItem","position":2,"name":"What should be noted during the welding of leads for transformers with a voltage of 60kV and above?"}]},{"@type":"WebSite","@id":"https:\/\/www.lstransformer.com\/#website","url":"https:\/\/www.lstransformer.com\/","name":"LS transformador de potencia, reactor de L\u00ednea de Alta tensi\u00f3n del transformador, el Aceite de transformador inmerso-CHANGSHA LUSHAN TECNOLOG\u00cdA ELECTR\u00d3NICA CO.,LTD","description":"","publisher":{"@id":"https:\/\/www.lstransformer.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.lstransformer.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es"},{"@type":"Organization","@id":"https:\/\/www.lstransformer.com\/#organization","name":"LS transformador de potencia, reactor de L\u00ednea de Alta tensi\u00f3n del transformador, el Aceite de transformador inmerso-CHANGSHA LUSHAN TECNOLOG\u00cdA ELECTR\u00d3NICA CO.,LTD","url":"https:\/\/www.lstransformer.com\/","logo":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/www.lstransformer.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/06\/cropped-7e09bd7bad9c830e0d75b8487b0d77c3-1.webp","contentUrl":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/06\/cropped-7e09bd7bad9c830e0d75b8487b0d77c3-1.webp","width":760,"height":202,"caption":"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD"},"image":{"@id":"https:\/\/www.lstransformer.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.lstransformer.com\/#\/schema\/person\/674089c15f4857c19a997f886816d289","name":"369703005","image":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/secure.gravatar.com\/avatar\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g","caption":"369703005"},"url":"https:\/\/www.lstransformer.com\/es\/author\/369703005\/"}]}},"_links":{"self":[{"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/posts\/1542","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/comments?post=1542"}],"version-history":[{"count":5,"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/posts\/1542\/revisions"}],"predecessor-version":[{"id":6409,"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/posts\/1542\/revisions\/6409"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/media\/2003"}],"wp:attachment":[{"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/media?parent=1542"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/categories?post=1542"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.lstransformer.com\/es\/wp-json\/wp\/v2\/tags?post=1542"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}