News

Connection section of Three-Phase Transformers Three-phase transformers are widely used in power systems to step up or step down the voltage levels in three-phase circuits. The connection of the three-phase transformer windings determines the output voltage and current characteristics of the transformer. There are several types of connection groups for...

What are the temperature control systems for dry-type transformers? The safe operation and service life of dry-type transformers largely depend on the safety and reliability of the winding insulation. Exceeding the insulation withstand temperature due to winding temperature can lead to insulation damage, which is one of the main reasons...

Why are there so many vent plugs and gas guide pipes on a transformer? Why is oil injected from the bottom of the tank? Vent plugs are commonly installed on the radiator, lifting platform, oil storage tank, and casing of transformers. This is because if vent plugs are not installed,...

How to Choose Transformers According to Electrical Load? The capacity of distribution transformers should consider the facility capacity of various electrical equipment, calculate the load (generally excluding fire loads), and the compensated apparent capacity is the basis for selecting the capacity and quantity of transformers. The load rate of general...

What should be considered when selecting and using bushings? When selecting and using bushings, certain considerations need to be taken into account. Bushings, as current-carrying components of transformers, directly impact the insulation performance of transformers. Here are the key points to be aware of during selection and usage: (1) Ambient...

A Look at the Different Connections and Their Effects on Sliding Core Transformer Impedance Characteristics The impedance characteristics of a sliding core transformer are determined by the various connecting configurations of the windings. The delta connection provides the lowest change in impedance per unit of current. This makes the delta...

How does the geological environment impact the operation of transformers? The primary consideration is the transformer's ability to withstand earthquakes. Under normal operating conditions, it is stipulated that the horizontal acceleration of the ground should be less than 0.3g, and the vertical acceleration should be less than 0.15g. When installing...

What are the most common winding connections for a three-phase transformer? The most common winding connections for a sliding core transformer are the delta, star, and Y-connections. The delta connection is typically used for higher voltage applications, as it provides a low impedance path for the current to flow. The...

What are the advantages of single-phase transformers? Less material usage: Single-phase transformers require 20% less iron and 10% less copper compared to three-phase transformers of the same capacity. Particularly when using a wound iron core structure, the no-load losses of the transformer can be reduced by more than 15%. This...

Maintaining and Operating a Contact Regulating Transformer In order to ensure the proper operation and maintenance of a contact regulating transformer, it is important to understand the basic principles and components involved. The primary components of the transformer are the contact coil, two arms, and two contact electrodes. The contact...

Several different types of wiring arrangements for contact regulating transformers. The most common type is the two-wire arrangement, which is typically used for low voltage applications. This arrangement consists of two leads, one connected to the contact electrode and the other connected to the DC power supply. This type of...

What are the features of a contact-controlled transformer? The structure of a contact regulating transformer is relatively simple, but engineered with a number of special features. First, the transformer is designed with two or more coils and arms. The two or more coils act as the primary and secondary coils...