{"id":1365,"date":"2026-07-22T05:33:15","date_gmt":"2026-07-22T05:33:15","guid":{"rendered":"https:\/\/lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/"},"modified":"2026-09-28T05:26:29","modified_gmt":"2026-09-28T05:26:29","slug":"wiring-methods-of-reactors-in-electrical-systems","status":"publish","type":"post","link":"https:\/\/www.lstransformer.com\/ja\/wiring-methods-of-reactors-in-electrical-systems\/","title":{"rendered":"Wiring Methods of Reactors in Electrical Systems"},"content":{"rendered":"

Wiring Methods of Reactors in Electrical Systems<\/h1>\n

\"\u672a\u5b9a\u7fa9\"<\/a><\/p>\n

Reactor wiring is a critical aspect of electrical system design and operation. There are several different methods that can be used to connect reactors in a circuit, each with its own advantages and disadvantages. One common method is to wire reactors in series, which can help increase overall inductance and reduce current ripple. Another method is to wire reactors in parallel, which can help distribute current more evenly and reduce the risk of overheating.<\/p>\n

It’s also important to consider the type of connection used, such as delta or wye, as well as the use of taps or adjustable reactors for greater flexibility in impedance control.<\/p>\n

Regardless of the wiring method chosen, it’s crucial to ensure proper grounding and insulation to prevent electrical hazards and ensure reliable operation. Engineers and designers should carefully evaluate their system requirements and consult with experts to determine the most suitable reactor wiring method for their specific application.<\/p>\n

In addition to the wiring method, there are several other factors that must be considered when designing and implementing reactors in electrical systems. One important consideration is the size and type of reactor needed for the specific application.<\/p>\n

Reactor size is typically determined based on the amount of inductance required to achieve the desired impedance control in the circuit. This, in turn, depends on the specific operating conditions and the electrical characteristics of the loads and sources involved.<\/p>\n

There are several different types of reactors that can be used in electrical systems, including air-core reactors, iron-core reactors, and hybrid reactors. Air-core reactors are typically used for low-power applications and offer low losses and high frequency response, but have lower inductance values compared to other types of reactors. Iron-core reactors, on the other hand, offer higher inductance values and are better suited for high-power applications, but can be more expensive and have higher losses. Hybrid reactors combine the benefits of both types and are often used in mid-to-high power applications.<\/p>\n

Another important consideration when implementing reactors is the need for temperature control. Reactors can generate significant heat when in use, which can affect their performance and reliability. To address this, some reactors are equipped with cooling systems, such as fans or liquid cooling, to help dissipate heat and maintain proper temperature levels.<\/p>\n

Ultimately, the selection and implementation of reactors in electrical systems requires careful consideration of a wide range of factors, including wiring method, reactor type, size, and temperature control. By taking the time to carefully evaluate these factors and consult with experts in the field, engineers and designers can ensure that their electrical systems are safe, efficient, and reliable.<\/p>\n

\u9023\u7d61\u5148<\/h2>\n

\u5eec\u5c71,est\u3002 1975\u5e74\u306b\u306f\u4e2d\u56fd\u306e\u5c02\u9580\u8077\u306e\u5c02\u9580\u30e1\u30fc\u30ab\u30fc\u306e\u96fb\u529b\u5909\u5727\u5668\u53ca\u3073\u539f\u5b50\u7089\u306e\u305f\u3081\u306e50+\u308b\u3002 \u4e3b\u88fd\u54c1 \u5358\u76f8\u30c8\u30e9\u30f3\u30b9\u3001\u4e09\u76f8\u7d76\u7e01\u5909\u5727\u5668\u3001\u96fb\u6c17\u30c8\u30e9\u30f3\u30b9\u3001\u7269\u6d41\u30c8\u30e9\u30f3\u30b9\u3001\u30b9\u30c6\u30c3\u30d7\u306e\u4e0b\u3001\u4fe1\u7528\u30ea\u30b9\u30af\u4ee5\u5916\u306e\u30ea\u30b9\u30af\u306b\u3064\u304d\u30c8\u30e9\u30f3\u30b9\u3001\u4f4e\u96fb\u5727\u30c8\u30e9\u30f3\u30b9\u3001\u9ad8\u96fb\u5727\u30c8\u30e9\u30f3\u30b9\u3001\u5236\u5fa1\u30c8\u30e9\u30f3\u30b9\u3001\u30c8\u30ed\u30a4\u30c0\u30eb\u30c8\u30e9\u30f3\u30b9\u3001R\u30b3\u30a2\u30c8\u30e9\u30f3\u30b9\u76f4\u6d41\u30a4\u30f3\u30c0\u30af\u30bf\u30fc\u3001AC\u7089\u3067\u306f\u3001\u30d5\u30a3\u30eb\u30bf\u30ea\u30f3\u30b0\u7089\u3001\u8ca0\u8377\u7089chokes\u3001\u30d5\u30a3\u30eb\u30bf\u30ea\u30f3\u30b0\u306e\u539f\u5b50\u7089\u306f\u3001\u4e2d\u9593\u4f53\u3001\u9ad8\u5468\u6ce2\u88fd\u54c1<\/a>.<\/p>\n

\u5f53\u793e\u306e\u96fb\u529b\u5909\u5727\u5668\u53ca\u3073\u539f\u5b50\u7089\u306b\u5e83\u304f\u4f7f\u7528\u3055\u308c\u306610\u30a2\u30d7\u30ea\u30b1\u30fc\u30b7\u30e7\u30f3:\u9ad8\u901f\u9244\u9053\u3001\u5efa\u8a2d\u6a5f\u68b0\u3001\u518d\u751f\u53ef\u80fd\u30a8\u30cd\u30eb\u30ae\u30fc\u3001\u30ed\u30dc\u30c3\u30c8\u3001\u533b\u7642\u6a5f\u5668\u3001\u70ad\u9271\u7206\u767a\u306e\u9632\u6b62\u3001\u52b1\u8d77\u30b7\u30b9\u30c6\u30e0\u3001\u771f\u7a7a\u713c\u7d50(\u7089)\u3001\u4e2d\u592e\u30a8\u30a2\u30b3\u30f3\u304c\u3042\u308a\u307e\u3059\u3002<\/p>\n

\u77e5\u96fb\u6e90\u30c8\u30e9\u30f3\u30b9\u539f\u5b50\u7089: www.lstransformer.com<\/a>.<\/p>\n

\u5e0c\u5f97\u306e\u30ab\u30b9\u30bf\u30de\u30a4\u30ba\u30bd\u30ea\u30e5\u30fc\u30b7\u30e7\u30f3\u306e\u305f\u3081\u306e\u30c8\u30e9\u30f3\u30b9\u3084\u539f\u5b50\u7089\u3001\u304a\u554f\u3044\u5408\u308f\u305b\u304f\u3060\u3055\u3044\u3002
\nWhatsApp\uff1a+86 13787095096
\n\u30e1\u30fc\u30eb:marketing@hnlsdz.com<\/p>","protected":false},"excerpt":{"rendered":"

Wiring Methods of Reactors in Electrical Systems Reactor wiring is a critical aspect of electrical system design and operation. There are several different methods that can be used to connect reactors in a circuit, each with its own advantages and disadvantages. One common method is to wire reactors in series, which can help increase overall inductance and reduce current ripple. Another method is to wire reactors in parallel, which can help distribute current more evenly and reduce the risk of overheating. It’s also important to consider the type of connection used, such as delta or wye, as well as the use of taps or adjustable reactors for greater flexibility in […]<\/p>\n","protected":false},"author":3,"featured_media":2548,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[48],"tags":[],"class_list":["post-1365","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-faq"],"yoast_head":"\nWiring Methods of Reactors in Electrical Systems - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD<\/title>\n<meta name=\"description\" content=\"Reactor wiring is a critical aspect of electrical system design and operation. There are several different methods that can be used to connect reactors in a circuit, each with its own advantages and disadvantages. One common method is to wire reactors in series, which can help increase overall inductance and reduce current ripple. Another method is to wire reactors in parallel, which can help distribute current more evenly and reduce the risk of overheating.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.lstransformer.com\/ja\/wiring-methods-of-reactors-in-electrical-systems\/\" \/>\n<meta property=\"og:locale\" content=\"ja_JP\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Wiring Methods of Reactors in Electrical Systems - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\" \/>\n<meta property=\"og:description\" content=\"Reactor wiring is a critical aspect of electrical system design and operation. There are several different methods that can be used to connect reactors in a circuit, each with its own advantages and disadvantages. One common method is to wire reactors in series, which can help increase overall inductance and reduce current ripple. Another method is to wire reactors in parallel, which can help distribute current more evenly and reduce the risk of overheating.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.lstransformer.com\/ja\/wiring-methods-of-reactors-in-electrical-systems\/\" \/>\n<meta property=\"og:site_name\" content=\"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\" \/>\n<meta property=\"article:published_time\" content=\"2026-07-22T05:33:15+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-28T05:26:29+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742177285642813.png\" \/>\n\t<meta property=\"og:image:width\" content=\"370\" \/>\n\t<meta property=\"og:image:height\" content=\"276\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"369703005\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u57f7\u7b46\u8005\" \/>\n\t<meta name=\"twitter:data1\" content=\"369703005\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u63a8\u5b9a\u8aad\u307f\u53d6\u308a\u6642\u9593\" \/>\n\t<meta name=\"twitter:data2\" content=\"4\u5206\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/\"},\"author\":{\"name\":\"369703005\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#\\\/schema\\\/person\\\/674089c15f4857c19a997f886816d289\"},\"headline\":\"Wiring Methods of Reactors in Electrical Systems\",\"datePublished\":\"2026-07-22T05:33:15+00:00\",\"dateModified\":\"2026-09-28T05:26:29+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/\"},\"wordCount\":573,\"publisher\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/1742177285642813.png\",\"articleSection\":[\"FAQ\"],\"inLanguage\":\"ja\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/\",\"name\":\"Wiring Methods of Reactors in Electrical Systems - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/1742177285642813.png\",\"datePublished\":\"2026-07-22T05:33:15+00:00\",\"dateModified\":\"2026-09-28T05:26:29+00:00\",\"description\":\"Reactor wiring is a critical aspect of electrical system design and operation. There are several different methods that can be used to connect reactors in a circuit, each with its own advantages and disadvantages. One common method is to wire reactors in series, which can help increase overall inductance and reduce current ripple. Another method is to wire reactors in parallel, which can help distribute current more evenly and reduce the risk of overheating.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/#breadcrumb\"},\"inLanguage\":\"ja\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/1742177285642813.png\",\"contentUrl\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/1742177285642813.png\",\"width\":370,\"height\":276},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/wiring-methods-of-reactors-in-electrical-systems\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/www.lstransformer.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Wiring Methods of Reactors in Electrical Systems\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#website\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/\",\"name\":\"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.lstransformer.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ja\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#organization\",\"name\":\"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/cropped-7e09bd7bad9c830e0d75b8487b0d77c3-1.webp\",\"contentUrl\":\"https:\\\/\\\/www.lstransformer.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/cropped-7e09bd7bad9c830e0d75b8487b0d77c3-1.webp\",\"width\":760,\"height\":202,\"caption\":\"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD\"},\"image\":{\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.lstransformer.com\\\/#\\\/schema\\\/person\\\/674089c15f4857c19a997f886816d289\",\"name\":\"369703005\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g\",\"caption\":\"369703005\"},\"url\":\"https:\\\/\\\/www.lstransformer.com\\\/ja\\\/author\\\/369703005\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Wiring Methods of Reactors in Electrical Systems - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD","description":"Reactor wiring is a critical aspect of electrical system design and operation. There are several different methods that can be used to connect reactors in a circuit, each with its own advantages and disadvantages. One common method is to wire reactors in series, which can help increase overall inductance and reduce current ripple. Another method is to wire reactors in parallel, which can help distribute current more evenly and reduce the risk of overheating.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.lstransformer.com\/ja\/wiring-methods-of-reactors-in-electrical-systems\/","og_locale":"ja_JP","og_type":"article","og_title":"Wiring Methods of Reactors in Electrical Systems - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD","og_description":"Reactor wiring is a critical aspect of electrical system design and operation. There are several different methods that can be used to connect reactors in a circuit, each with its own advantages and disadvantages. One common method is to wire reactors in series, which can help increase overall inductance and reduce current ripple. Another method is to wire reactors in parallel, which can help distribute current more evenly and reduce the risk of overheating.","og_url":"https:\/\/www.lstransformer.com\/ja\/wiring-methods-of-reactors-in-electrical-systems\/","og_site_name":"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD","article_published_time":"2026-07-22T05:33:15+00:00","article_modified_time":"2026-09-28T05:26:29+00:00","og_image":[{"width":370,"height":276,"url":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742177285642813.png","type":"image\/png"}],"author":"369703005","twitter_card":"summary_large_image","twitter_misc":{"\u57f7\u7b46\u8005":"369703005","\u63a8\u5b9a\u8aad\u307f\u53d6\u308a\u6642\u9593":"4\u5206"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/#article","isPartOf":{"@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/"},"author":{"name":"369703005","@id":"https:\/\/www.lstransformer.com\/#\/schema\/person\/674089c15f4857c19a997f886816d289"},"headline":"Wiring Methods of Reactors in Electrical Systems","datePublished":"2026-07-22T05:33:15+00:00","dateModified":"2026-09-28T05:26:29+00:00","mainEntityOfPage":{"@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/"},"wordCount":573,"publisher":{"@id":"https:\/\/www.lstransformer.com\/#organization"},"image":{"@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742177285642813.png","articleSection":["FAQ"],"inLanguage":"ja"},{"@type":"WebPage","@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/","url":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/","name":"Wiring Methods of Reactors in Electrical Systems - LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD","isPartOf":{"@id":"https:\/\/www.lstransformer.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/#primaryimage"},"image":{"@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/#primaryimage"},"thumbnailUrl":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742177285642813.png","datePublished":"2026-07-22T05:33:15+00:00","dateModified":"2026-09-28T05:26:29+00:00","description":"Reactor wiring is a critical aspect of electrical system design and operation. There are several different methods that can be used to connect reactors in a circuit, each with its own advantages and disadvantages. One common method is to wire reactors in series, which can help increase overall inductance and reduce current ripple. Another method is to wire reactors in parallel, which can help distribute current more evenly and reduce the risk of overheating.","breadcrumb":{"@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/#breadcrumb"},"inLanguage":"ja","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/"]}]},{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/#primaryimage","url":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742177285642813.png","contentUrl":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/07\/1742177285642813.png","width":370,"height":276},{"@type":"BreadcrumbList","@id":"https:\/\/www.lstransformer.com\/wiring-methods-of-reactors-in-electrical-systems\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/www.lstransformer.com\/"},{"@type":"ListItem","position":2,"name":"Wiring Methods of Reactors in Electrical Systems"}]},{"@type":"WebSite","@id":"https:\/\/www.lstransformer.com\/#website","url":"https:\/\/www.lstransformer.com\/","name":"LS\u96fb\u6e90\u30c8\u30e9\u30f3\u30b9\u3001\u7089\u3067\u306f\u3001\u9ad8\u96fb\u5727\u30c8\u30e9\u30f3\u30b9\u3001\u6cb9\u5165\u5909\u5727\u5668-\u9577\u6c99(\u9577\u6c99\u7687\u51a0\u4eee\u65e5\u9152\u5e97)\u5eec\u5c71\u96fb\u5b50\u6280\u8853\u682a\u5f0f\u682a\u5f0f\u4f1a\u793e","description":"","publisher":{"@id":"https:\/\/www.lstransformer.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.lstransformer.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ja"},{"@type":"Organization","@id":"https:\/\/www.lstransformer.com\/#organization","name":"LS\u96fb\u6e90\u30c8\u30e9\u30f3\u30b9\u3001\u7089\u3067\u306f\u3001\u9ad8\u96fb\u5727\u30c8\u30e9\u30f3\u30b9\u3001\u6cb9\u5165\u5909\u5727\u5668-\u9577\u6c99(\u9577\u6c99\u7687\u51a0\u4eee\u65e5\u9152\u5e97)\u5eec\u5c71\u96fb\u5b50\u6280\u8853\u682a\u5f0f\u682a\u5f0f\u4f1a\u793e","url":"https:\/\/www.lstransformer.com\/","logo":{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/www.lstransformer.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/06\/cropped-7e09bd7bad9c830e0d75b8487b0d77c3-1.webp","contentUrl":"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/06\/cropped-7e09bd7bad9c830e0d75b8487b0d77c3-1.webp","width":760,"height":202,"caption":"LS power transformer, Line reactor, High-voltage transformer, Oil-immersed transformer-CHANGSHA LUSHAN ELECTRONIC TECHNOLOGY CO.,LTD"},"image":{"@id":"https:\/\/www.lstransformer.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.lstransformer.com\/#\/schema\/person\/674089c15f4857c19a997f886816d289","name":"369703005","image":{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/secure.gravatar.com\/avatar\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/dcaa0e47cd7b6c99ffdd80f5772032ed2d2591b5b8e7b905e5fd87a850954248?s=96&d=mm&r=g","caption":"369703005"},"url":"https:\/\/www.lstransformer.com\/ja\/author\/369703005\/"}]}},"_links":{"self":[{"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/posts\/1365","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/comments?post=1365"}],"version-history":[{"count":5,"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/posts\/1365\/revisions"}],"predecessor-version":[{"id":6844,"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/posts\/1365\/revisions\/6844"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/media\/2548"}],"wp:attachment":[{"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/media?parent=1365"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/categories?post=1365"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.lstransformer.com\/ja\/wp-json\/wp\/v2\/tags?post=1365"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}