![\"\"](\"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/10\/1-8.jpg\")
<\/a><\/p>\n1. Why Must Transformers Undergo Impregnation Treatment?<\/em><\/h3>\nTransformers face multiple stresses during operation\u2014electrical, thermal, mechanical, and environmental. In windings without impregnation, conductors, layers, and the windings themselves are mainly isolated by air and solid insulating materials. However, air has poor insulating properties (low dielectric strength) and is easily affected by humidity and contaminants, making it a weak point in the insulation system. The fundamental purpose of impregnation is to replace or fill these air gaps with insulating varnish, which has excellent electrical, mechanical, and chemical properties, thereby building a robust and integrated insulation system.<\/p>\n
1.1 Core Objectives and Cause-Effect Relationships of Impregnation Treatment<\/b><\/strong><\/h4>\nImpregnation aims to achieve the following four core objectives, with direct physical and chemical cause-effect relationships between the measures and their results.<\/p>\n
1.1.1 Enhancing Electrical Insulation Strength and Partial Discharge Protection<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nConductor surfaces in windings have microscopic burrs, and there are uneven air gaps between turns and layers. Under high-voltage electric fields, the distribution of the electric field within these air gaps becomes highly distorted. Air has a low dielectric constant and a much lower breakdown field strength compared to solid insulating materials. This leads to localized electric field concentration, which initially triggers\u00a0partial discharge. Although partial discharge is weak, it continuously erodes the surrounding insulating materials. Over time, this causes insulation aging and carbonization, eventually leading to insulation breakdown.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThrough impregnation, low-viscosity insulating varnish penetrates into the smallest gaps of the winding under vacuum and pressure conditions, completely displacing the air.<\/p>\n
1.1.2 Improving Heat Dissipation and Thermal Management<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nCopper losses and iron losses during transformer operation generate heat. Air has very poor thermal conductivity, making it difficult for heat within the windings to be effectively transferred to external radiators or the oil tank. This results in increased hotspot temperatures. According to the\u00a0Arrhenius Law, the aging rate of insulating materials increases exponentially with temperature\u2014for every 8-10\u00b0C rise in temperature, the insulation lifespan is roughly halved.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nUsing insulating varnish to fill the gaps. Although cured insulating varnish is a poor thermal conductor, its thermal conductivity (approximately 0.2-0.3 W\/m\u00b7K) is still an order of magnitude higher than that of air. This helps establish efficient heat conduction paths.<\/p>\n
1.1.3 Increasing Mechanical Strength and Vibration Resistance<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nTransformers, especially power transformers, are subjected to mechanical stresses caused by electromagnetic forces and physical vibrations (e.g., from the installation environment). Loosely structured windings may experience minor displacements and friction under alternating electromagnetic forces, leading to long-term insulation wear, conductor deformation, or even breakage.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nAfter curing, the insulating varnish bonds the wires, insulating materials, and framework into a solid, rigid whole\u2014essentially creating a\u00a0structural adhesive bond. The cured varnish film provides strong adhesive force, locking all components in place. This allows the entire winding to function like a solid block of “concrete,” significantly enhancing its vibration resistance and ability to withstand short-circuit electromagnetic forces.<\/p>\n
1.1.4 Providing Excellent Moisture, Corrosion, and Environmental Protection<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nMoisture, salt spray, chemical pollutants, and oxygen from the environment can penetrate the winding. Moisture reduces the volume resistivity of insulating materials, increases dielectric loss, and accelerates hydrolytic aging. Pollutants can form conductive paths or corrode metal conductors.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThe cured varnish film forms a\u00a0continuous, non-porous\u00a0barrier on the winding surface and within internal gaps. This barrier effectively blocks the penetration of external moisture, gases, and pollutants. It also isolates the winding interior from the external environment, preventing potential cross-contamination and ensuring the long-term stability of the insulation system under various harsh conditions.<\/p>\n
Impregnation aims to achieve the following four core objectives, with direct physical and chemical cause-effect relationships between the measures and their results.<\/p>\n
1.1.1 Enhancing Electrical Insulation Strength and Partial Discharge Protection<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nConductor surfaces in windings have microscopic burrs, and there are uneven air gaps between turns and layers. Under high-voltage electric fields, the distribution of the electric field within these air gaps becomes highly distorted. Air has a low dielectric constant and a much lower breakdown field strength compared to solid insulating materials. This leads to localized electric field concentration, which initially triggers\u00a0partial discharge. Although partial discharge is weak, it continuously erodes the surrounding insulating materials. Over time, this causes insulation aging and carbonization, eventually leading to insulation breakdown.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThrough impregnation, low-viscosity insulating varnish penetrates into the smallest gaps of the winding under vacuum and pressure conditions, completely displacing the air.<\/p>\n
1.1.2 Improving Heat Dissipation and Thermal Management<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nCopper losses and iron losses during transformer operation generate heat. Air has very poor thermal conductivity, making it difficult for heat within the windings to be effectively transferred to external radiators or the oil tank. This results in increased hotspot temperatures. According to the\u00a0Arrhenius Law, the aging rate of insulating materials increases exponentially with temperature\u2014for every 8-10\u00b0C rise in temperature, the insulation lifespan is roughly halved.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nUsing insulating varnish to fill the gaps. Although cured insulating varnish is a poor thermal conductor, its thermal conductivity (approximately 0.2-0.3 W\/m\u00b7K) is still an order of magnitude higher than that of air. This helps establish efficient heat conduction paths.<\/p>\n
1.1.3 Increasing Mechanical Strength and Vibration Resistance<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nTransformers, especially power transformers, are subjected to mechanical stresses caused by electromagnetic forces and physical vibrations (e.g., from the installation environment). Loosely structured windings may experience minor displacements and friction under alternating electromagnetic forces, leading to long-term insulation wear, conductor deformation, or even breakage.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nAfter curing, the insulating varnish bonds the wires, insulating materials, and framework into a solid, rigid whole\u2014essentially creating a\u00a0structural adhesive bond. The cured varnish film provides strong adhesive force, locking all components in place. This allows the entire winding to function like a solid block of “concrete,” significantly enhancing its vibration resistance and ability to withstand short-circuit electromagnetic forces.<\/p>\n
1.1.4 Providing Excellent Moisture, Corrosion, and Environmental Protection<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nMoisture, salt spray, chemical pollutants, and oxygen from the environment can penetrate the winding. Moisture reduces the volume resistivity of insulating materials, increases dielectric loss, and accelerates hydrolytic aging. Pollutants can form conductive paths or corrode metal conductors.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThe cured varnish film forms a\u00a0continuous, non-porous\u00a0barrier on the winding surface and within internal gaps. This barrier effectively blocks the penetration of external moisture, gases, and pollutants. It also isolates the winding interior from the external environment, preventing potential cross-contamination and ensuring the long-term stability of the insulation system under various harsh conditions.<\/p>\n
Conductor surfaces in windings have microscopic burrs, and there are uneven air gaps between turns and layers. Under high-voltage electric fields, the distribution of the electric field within these air gaps becomes highly distorted. Air has a low dielectric constant and a much lower breakdown field strength compared to solid insulating materials. This leads to localized electric field concentration, which initially triggers\u00a0partial discharge. Although partial discharge is weak, it continuously erodes the surrounding insulating materials. Over time, this causes insulation aging and carbonization, eventually leading to insulation breakdown.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThrough impregnation, low-viscosity insulating varnish penetrates into the smallest gaps of the winding under vacuum and pressure conditions, completely displacing the air.<\/p>\n
1.1.2 Improving Heat Dissipation and Thermal Management<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nCopper losses and iron losses during transformer operation generate heat. Air has very poor thermal conductivity, making it difficult for heat within the windings to be effectively transferred to external radiators or the oil tank. This results in increased hotspot temperatures. According to the\u00a0Arrhenius Law, the aging rate of insulating materials increases exponentially with temperature\u2014for every 8-10\u00b0C rise in temperature, the insulation lifespan is roughly halved.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nUsing insulating varnish to fill the gaps. Although cured insulating varnish is a poor thermal conductor, its thermal conductivity (approximately 0.2-0.3 W\/m\u00b7K) is still an order of magnitude higher than that of air. This helps establish efficient heat conduction paths.<\/p>\n
1.1.3 Increasing Mechanical Strength and Vibration Resistance<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nTransformers, especially power transformers, are subjected to mechanical stresses caused by electromagnetic forces and physical vibrations (e.g., from the installation environment). Loosely structured windings may experience minor displacements and friction under alternating electromagnetic forces, leading to long-term insulation wear, conductor deformation, or even breakage.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nAfter curing, the insulating varnish bonds the wires, insulating materials, and framework into a solid, rigid whole\u2014essentially creating a\u00a0structural adhesive bond. The cured varnish film provides strong adhesive force, locking all components in place. This allows the entire winding to function like a solid block of “concrete,” significantly enhancing its vibration resistance and ability to withstand short-circuit electromagnetic forces.<\/p>\n
1.1.4 Providing Excellent Moisture, Corrosion, and Environmental Protection<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nMoisture, salt spray, chemical pollutants, and oxygen from the environment can penetrate the winding. Moisture reduces the volume resistivity of insulating materials, increases dielectric loss, and accelerates hydrolytic aging. Pollutants can form conductive paths or corrode metal conductors.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThe cured varnish film forms a\u00a0continuous, non-porous\u00a0barrier on the winding surface and within internal gaps. This barrier effectively blocks the penetration of external moisture, gases, and pollutants. It also isolates the winding interior from the external environment, preventing potential cross-contamination and ensuring the long-term stability of the insulation system under various harsh conditions.<\/p>\n
(1)Root Cause:\u00a0<\/strong><\/h6>\nCopper losses and iron losses during transformer operation generate heat. Air has very poor thermal conductivity, making it difficult for heat within the windings to be effectively transferred to external radiators or the oil tank. This results in increased hotspot temperatures. According to the\u00a0Arrhenius Law, the aging rate of insulating materials increases exponentially with temperature\u2014for every 8-10\u00b0C rise in temperature, the insulation lifespan is roughly halved.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nUsing insulating varnish to fill the gaps. Although cured insulating varnish is a poor thermal conductor, its thermal conductivity (approximately 0.2-0.3 W\/m\u00b7K) is still an order of magnitude higher than that of air. This helps establish efficient heat conduction paths.<\/p>\n
1.1.3 Increasing Mechanical Strength and Vibration Resistance<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nTransformers, especially power transformers, are subjected to mechanical stresses caused by electromagnetic forces and physical vibrations (e.g., from the installation environment). Loosely structured windings may experience minor displacements and friction under alternating electromagnetic forces, leading to long-term insulation wear, conductor deformation, or even breakage.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nAfter curing, the insulating varnish bonds the wires, insulating materials, and framework into a solid, rigid whole\u2014essentially creating a\u00a0structural adhesive bond. The cured varnish film provides strong adhesive force, locking all components in place. This allows the entire winding to function like a solid block of “concrete,” significantly enhancing its vibration resistance and ability to withstand short-circuit electromagnetic forces.<\/p>\n
1.1.4 Providing Excellent Moisture, Corrosion, and Environmental Protection<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nMoisture, salt spray, chemical pollutants, and oxygen from the environment can penetrate the winding. Moisture reduces the volume resistivity of insulating materials, increases dielectric loss, and accelerates hydrolytic aging. Pollutants can form conductive paths or corrode metal conductors.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThe cured varnish film forms a\u00a0continuous, non-porous\u00a0barrier on the winding surface and within internal gaps. This barrier effectively blocks the penetration of external moisture, gases, and pollutants. It also isolates the winding interior from the external environment, preventing potential cross-contamination and ensuring the long-term stability of the insulation system under various harsh conditions.<\/p>\n
Using insulating varnish to fill the gaps. Although cured insulating varnish is a poor thermal conductor, its thermal conductivity (approximately 0.2-0.3 W\/m\u00b7K) is still an order of magnitude higher than that of air. This helps establish efficient heat conduction paths.<\/p>\n
1.1.3 Increasing Mechanical Strength and Vibration Resistance<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nTransformers, especially power transformers, are subjected to mechanical stresses caused by electromagnetic forces and physical vibrations (e.g., from the installation environment). Loosely structured windings may experience minor displacements and friction under alternating electromagnetic forces, leading to long-term insulation wear, conductor deformation, or even breakage.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nAfter curing, the insulating varnish bonds the wires, insulating materials, and framework into a solid, rigid whole\u2014essentially creating a\u00a0structural adhesive bond. The cured varnish film provides strong adhesive force, locking all components in place. This allows the entire winding to function like a solid block of “concrete,” significantly enhancing its vibration resistance and ability to withstand short-circuit electromagnetic forces.<\/p>\n
1.1.4 Providing Excellent Moisture, Corrosion, and Environmental Protection<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nMoisture, salt spray, chemical pollutants, and oxygen from the environment can penetrate the winding. Moisture reduces the volume resistivity of insulating materials, increases dielectric loss, and accelerates hydrolytic aging. Pollutants can form conductive paths or corrode metal conductors.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThe cured varnish film forms a\u00a0continuous, non-porous\u00a0barrier on the winding surface and within internal gaps. This barrier effectively blocks the penetration of external moisture, gases, and pollutants. It also isolates the winding interior from the external environment, preventing potential cross-contamination and ensuring the long-term stability of the insulation system under various harsh conditions.<\/p>\n
Transformers, especially power transformers, are subjected to mechanical stresses caused by electromagnetic forces and physical vibrations (e.g., from the installation environment). Loosely structured windings may experience minor displacements and friction under alternating electromagnetic forces, leading to long-term insulation wear, conductor deformation, or even breakage.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nAfter curing, the insulating varnish bonds the wires, insulating materials, and framework into a solid, rigid whole\u2014essentially creating a\u00a0structural adhesive bond. The cured varnish film provides strong adhesive force, locking all components in place. This allows the entire winding to function like a solid block of “concrete,” significantly enhancing its vibration resistance and ability to withstand short-circuit electromagnetic forces.<\/p>\n
1.1.4 Providing Excellent Moisture, Corrosion, and Environmental Protection<\/b><\/strong><\/h5>\n(1)Root Cause:\u00a0<\/strong><\/h6>\nMoisture, salt spray, chemical pollutants, and oxygen from the environment can penetrate the winding. Moisture reduces the volume resistivity of insulating materials, increases dielectric loss, and accelerates hydrolytic aging. Pollutants can form conductive paths or corrode metal conductors.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThe cured varnish film forms a\u00a0continuous, non-porous\u00a0barrier on the winding surface and within internal gaps. This barrier effectively blocks the penetration of external moisture, gases, and pollutants. It also isolates the winding interior from the external environment, preventing potential cross-contamination and ensuring the long-term stability of the insulation system under various harsh conditions.<\/p>\n
(1)Root Cause:\u00a0<\/strong><\/h6>\nMoisture, salt spray, chemical pollutants, and oxygen from the environment can penetrate the winding. Moisture reduces the volume resistivity of insulating materials, increases dielectric loss, and accelerates hydrolytic aging. Pollutants can form conductive paths or corrode metal conductors.<\/p>\n
(2)Solution (Impregnation):\u00a0<\/strong><\/h6>\nThe cured varnish film forms a\u00a0continuous, non-porous\u00a0barrier on the winding surface and within internal gaps. This barrier effectively blocks the penetration of external moisture, gases, and pollutants. It also isolates the winding interior from the external environment, preventing potential cross-contamination and ensuring the long-term stability of the insulation system under various harsh conditions.<\/p>\n
The cured varnish film forms a\u00a0continuous, non-porous\u00a0barrier on the winding surface and within internal gaps. This barrier effectively blocks the penetration of external moisture, gases, and pollutants. It also isolates the winding interior from the external environment, preventing potential cross-contamination and ensuring the long-term stability of the insulation system under various harsh conditions.<\/p>\n
![\"\"](\"https:\/\/www.lstransformer.com\/wp-content\/uploads\/2026\/10\/2-8.jpg\")
<\/a><\/div>\n