How to analyze and dissectthree-phasetransformers?

A transformer is a device that transforms AC voltage, current, and impedance. When an AC current flows through the primary coil, an alternating magnetic flux is generated in the core (or magnetic core), inducing voltage (or current) in the secondary coil. With the continuous development of the transformer industry, more and more industries and enterprises are using transformers, and more and more enterprises are entering the transformer industry. Transformers are composed of cores (or magnetic cores) and coils, with two or more windings. The winding that is connected to the power source is called the primary winding, and the remaining windings are called secondary windings.

1. Parameters of transformers:

(1) Rated power: The characteristic sign variable of the current transformer under the frequency and voltage.

(2) Rated voltage: The voltage applied to the coil of the transformer. The transformer can work for a long time without exceeding the temperature rise of the output power.

(3) Voltage ratio: Refers to the ratio of the high voltage to the secondary voltage of the transformer, with differences between the no-load voltage ratio and the load voltage ratio.

(4) Operating frequency: The relationship between the iron loss of the transformer core and the frequency is significant, so the frequency used for design and operation is called the operating frequency.

(5) Efficiency: The percentage ratio of the secondary power P2 to the primary power P1. The higher the rated power of the transformer, the higher the efficiency.

(6) No-load loss: Refers to the power loss measured at the high side when the secondary of the transformer is open. The main loss is the core loss, followed by the loss caused by the current flowing through the original coil copper resistance (copper loss). This part of the loss is relatively small.

(7) No-load current: When the secondary of a three-phase transformer is open, there is still an indefinite current, which is called the no-load current. The no-load current consists of magnetizing current (which generates magnetic flux) and iron loss current (caused by core loss). For a 50Hz current transformer, the no-load current is generally higher than the magnetizing current.

(8) Insulation resistance: Represents the insulation performance between the coils of the transformer, between each coil and the core. The insulation resistance is related to the performance of the insulation material used, temperature fluctuations, and the degree of humidity.

Contact

LuShan, heure de l'est. 1975, est un fabricant professionnel Chinois spécialisé dans les transformateurs de puissance et des réacteurs de plus de 50 ans. Les produits de pointe sont transformateur monophasé, triphasé transformateurs d'isolement, transformateur électrique, transformateur de distribution, l'étape vers le bas et d'intensifier le transformateur de basse tension du transformateur, transformateur à haute tension, contrôle de transformateur toroïdal transformateur, transformateur R-core; inductances DC, AC réacteurs, le filtrage du réacteur, de ligne et de charge du réacteur, des bobines, le filtrage du réacteur, et intermédiaire, à haute fréquence produits.

Nos transformateurs de puissance et les réacteurs sont largement utilisés dans les 10 domaines d'application: transport en commun rapide, les machines de construction, les énergies renouvelables, intelligents de fabrication, des équipements médicaux, de la mine de charbon de l'explosion de la prévention, de l'excitation du système, frittage sous vide(four), d'une climatisation centrale.

En savoir plus sur transformateur de puissance et le réacteur: www.lstransformer.com.

Si vous souhaitez obtenir des solutions personnalisées pour les transformateurs ou des réacteurs, veuillez nous contacter.
WhatsApp：+86 13787095096
E-mail: marketing@hnlsdz.com