Новости отрасли

What is the Function of a Reactor? A reactor, also known as a reactor coil or inductor, is an electronic component that stores and releases energy in the form of a magnetic field. Its primary function is to limit or control the flow of electrical current in a circuit. Reactor...

What is the definition of a single-phase transformer? A single-phase transformer is a transformer in which both the primary winding and the secondary winding are single-phase windings. A unipolar switch power supply refers to an output that is unipolar, meaning it only has positive and negative outputs, as opposed to...

How to Reduce No-Load Losses in Transformers? No-load losses in transformers refer to the power consumed when the transformer's secondary winding is open (i.e., not connected to a load). These losses mainly include core losses and stray magnetic losses. No-load losses are inherent to the transformer's operation and have a...

How does wind speed affect the operation of transformers? Typically, the maximum wind speed at a certain distance above the ground is specified over a specific period. For example, at a height of 10 meters above the ground, the wind speed reaches 35 meters per second within a 10-minute interval....

What kind of sealing material should be chosen for oil-immersed transformers? Choosing sealing materials that are compatible with the characteristics of transformers is crucial. Technical conditions related to sealing materials include the working medium, working pressure, and working temperature. 1. Working medium The working medium mainly involves transformer oil, air,...

How Excessive Temperature Rise Ages Transformer Insulation?  — Comprehensive Methods to Control Temperature Rise Transformers are the core equipment of power systems, and their operating temperature directly impacts the lifespan of insulation materials and grid safety. Research by the International Electrotechnical Commission (IEC) indicates that excessive temperature rise is the...

How to Design Anti-Sand Clogging for Transformer Radiators in Desert Areas? In global energy infrastructure, transformers play a critical role, especially in harsh desert environments. Desert conditions pose unique challenges for transformer radiators, with sand and dust clogging being a prominent issue. This article provides a scientific and detailed analysis...

What is the impact of temperature on the operation of transformers? The ambient temperature refers to the naturally changing air temperature, with daily variations exhibiting a sinusoidal pattern. The annual ambient temperature variation follows a double sinusoidal function. Under normal operating conditions, the temperature of transformers should adhere to the...

What are the methods for isolating metal fines? Install embedded plastic throat rings. Add a throat ring at the pump casing of the impeller, which can be made of polytetrafluoroethylene (PTFE) or produced using epoxy glass fiber rods. This alteration changes the physical properties of the relative friction surface, preventing...

How to choose the magnetic flux density in the core of transformer-class products? When selecting the magnetic flux density in the core, several considerations need to be taken into account. (1) Material of electrical steel sheets: If the magnetic flux density is chosen too high, the no-load current and no-load...

What Are the Special Protection Requirements for Explosion‑Proof Transformers? In high-risk industries such as petrochemicals, mining, and pharmaceutical manufacturing, explosion-proof transformers are core equipment for ensuring safe power supply. These special environments are often laden with flammable gases, vapors, or dust – where even a tiny electrical spark can trigger...

Transformers are widely used in electrical systems to transfer electrical energy from one circuit to another. Two common types of transformers are autotransformers and isolation transformers. Although they both perform the same basic function, they have significant differences. An autotransformer is a type of transformer that has only one winding...