What are the characteristics of the three commonly used winding configurations in transformers?

Home > FAQ > What are the characteristics of the three commonly used winding configurations in transformers?

What are the characteristics of the three commonly used winding configurations in transformers?

微信分享

请复制下面链接,在微信内打开分享
https://www.lstransformer.com/what-are-the-characteristics-of-the-three-commonly-used-winding-configurations-in-transformers/

What are the characteristics of the three commonly used winding configurations in transformers?

undefined

(1) Y-shaped winding characteristics:

The Y-shaped winding has a winding current equal to the line current, with a larger wire cross-section, providing excellent mechanical strength. The winding voltage is equal to 1/√3 times the line voltage, resulting in fewer turns and insulation requirements. The filling factor of the conductor is large, enabling graded insulation. Due to the high filling factor, the inter-turn capacitance is higher, resulting in a uniform distribution of impulse voltage. Additionally, the neutral point can be grounded and used to achieve a four-wire system. The main drawback of this configuration is the absence of a circulating loop for the third harmonic current.

(2) D-shaped winding characteristics:

The D-shaped winding has characteristics opposite to those of the Y-shaped winding.

(3) Z-shaped winding characteristics:

The Z-shaped winding shares the advantages of the Y-shaped winding but has 15.5% more turns. Although the Z-shaped winding lacks a circulating loop for the third harmonic, even in the presence of third harmonic flux in the core, the voltages of the third harmonic in the two half-windings are equal in magnitude and opposite in direction. Therefore, there are no third harmonic voltages across the line terminals to the neutral point.

The advantages of the Z-shaped winding include equal and opposite magnetic potentials in the two half-windings when subjected to impulse currents. Consequently, when one side of the winding experiences impulse overvoltage, the other side does not induce overvoltage on itself. However, due to a 30° phase shift between the voltage vectors of the two half-windings, the effective material usage for the winding increases by 15.5%, resulting in larger iron cores and increased costs. Therefore, Z-shaped windings are typically used only on the low-voltage side.

Contact

LuShan, est. 1975, is a Chinese professional manufacturer specializing in power transformers and reactors for 50+ years. Leading products are single-phase transformer, three-phase isolation transformers, electrical transformer, distribution transformer, step down and step up transformer, low voltage transformer, high voltage transformer, control transformer, toroidal transformer, R-core transformer; DC inductors, AC reactors, filtering reactor, line and load reactor, chokes, filtering reactor, and intermediate, high-frequency products.

Our power transformers and reactors are widely used in 10 application areas: rapid transit, construction machinery, renewable energy, intelligent manufacturing, medical equipment, coal mine explosion prevention, excitation system, vacuum sintering(furnace), central air conditioning.

Know more about power transformer and reactor: www.lstransformer.com.

If you would like to obtain customized solutions for transformers or reactors, please contact us.
WhatsApp:+86 13787095096
Email: marketing@hnlsdz.com

WhatsApp QR WeChat QR sales@hnlsdz.com
Scroll to Top