Harmonic Control in Power Systems: Reactor Selection and Configuration

Home > FAQ > Harmonic Control in Power Systems: Reactor Selection and Configuration

Harmonic Control in Power Systems: Reactor Selection and Configuration

微信分享

请复制下面链接,在微信内打开分享
https://www.lstransformer.com/de/harmonic-control-in-power-systems-reactor-selection-and-configuration/

Harmonic Control in Power Systems: Reactor Selection and Configuration

With the rapid development of industrial equipment, renewable energy power stations, and data centers, harmonic pollution in power systems has become increasingly severe. Harmonics not only cause transformer overheating and cable insulation aging but may also trigger serious accidents such as capacitor resonance explosions. Reactors, as the core equipment for harmonic control, directly determine the effectiveness of mitigation through their selection and configuration. This article explores how to achieve efficient harmonic control through scientific selection and systematic configuration, starting from the principles of harmonic suppression and incorporating global engineering practices.

Inhalt

1. Harmonic Hazards and the Suppression Principles of Reactors

1.1 Generation and Destructive Mechanisms of Harmonics

Harmonics are voltage or current components with frequencies that are integer multiples of the fundamental frequency (50/60 Hz), primarily generated by nonlinear loads such as variable frequency drives (VFDs), rectifiers, and LED power supplies. Their hazards include:

(1) Transformer Overheating:

Harmonic currents cause eddy current losses and stray losses. The loss formula is:

wps9

(2) Resonance:

Harmonic currents interact with capacitor reactance to form resonance, leading to voltage amplification or even equipment breakdown.

2

1.2 Core Principles of Reactor-Based Harmonic Suppression

Reactors suppress harmonics through two physical mechanisms:

(1) Impedance Matching:

Series reactors increase system impedance, altering the path of harmonic currents and directing them toward low-impedance filter circuits. For instance, the inductive reactance of a series reactor (wps10) and capacitor reactance (wps11) work together to make the system exhibit high impedance to specific harmonics, thereby preventing their flow into the grid.

現在のチケットの状態の適用の乾式トランス? 

Filter reactors and capacitors form LC filters, creating low-impedance paths for targeted harmonics. For example, a 5th harmonic filter is designed with a resonant frequency of 250 Hz, where the LC circuit’s impedance is minimized, actively absorbing harmonic currents and converting them into heat.

(3) Case Study: 

A German automotive factory installed a 5th harmonic filter (6% reactance rate) on the output side of a VFD, reducing 5th harmonic current from 120A to 30A and lowering transformer temperature rise by 40%.

2. Key Technical Parameters for Reactor Selection

2.1 Reactance Rate Selection and Resonance Avoidance

The reactance rate (wps12), the ratio of reactor inductive reactance to capacitor capacitive reactance, determines the resonant frequency.

The resonant frequency is calculated as:
wps13

wowps14 is the fundamental frequency.

(1) 4%-7% Reactance Rate:

 Suitable for suppressing 5th and higher-order harmonics (wps15). For example, a 6% reactance rate yields a resonant frequency of 204 Hz (corresponding to 4.08th harmonic), effectively avoiding 5th harmonic resonance risks.

(2) 14% Reactance Rate:

Targets 3rd harmonic (150Hz)scenarios, such as UPS systems in data centers. Here, the resonant frequency:

wps16

far from the 3rd harmonic frequency.

4

2.2 Current Capacity and Temperature Rise Design

(1) Current Capacity:

Reactors must withstand additional thermal stress from harmonic currents. The total current capacity should satisfy:

wps17
どのように切削加工には鉄芯が行なわれるのですか? -LS電源トランス、炉では、高電圧トランス、油入変圧器-長沙(長沙皇冠仮日酒店)廬山電子技術株式株式会社

Thecore切削加工は非常に大切であると考えて変圧器製造に直接影響を及ぼすコアの性能と品質です。 品質を保証するために、コアに対して、様々な技術や手法は一般的に採用しました。 主に切削技術

どのように切削加工には鉄芯が行なわれるのですか?wps18>どのように切削加工には鉄芯が行なわれるのですか?

–Insulation Class:Class B (≤80K), Class F (≤100K), or Class H (≤125K) insulation materials to adapt to varying ambient temperatures.

Thecore切削加工は非常に大切であると考えて変圧器製造に直接影響を及ぼすコア’sの性能と品質です。 品質を保証するために、コアに対して、様々な技術や手法は一般的に採用しました。 主に切削技術

1. 輪切削プロセス:

(1)ホイール選定:

切削加工でトランスコア、薄型ホイールグリットサイズの50は一般的に使用します。 このタイプのホイールの高い切断精度と効率性、回転速度制御と1400 3000回転数に対応differentcoreの厚さです。

 (1)固定および保護wps19切断の際に必要であるしっかりと確保の核変形防止のため,間はく離防止、またはフレアリングの切削いですね。 切削速度の適切な管理をホイールワathigh速度を確保するため、円滑かつ正確な切断面です。

(2)冷却と潤滑:

防止への過度の発熱時の切断、劣化する材料の性能冷却のホイール、切断面が必要です。 冷却液体は通常混合物の防錆乳化油としても知られるソープ石油および水1:5の比である。 水道水を使用できる、春、夏、秋、温水を使用する必要があ冬の希釈theemulsified。 このアプローチに低減しますの切削温度とします。

(3)冷却液体の維持管理

寿命の冷却液体、鉄粉の除去に用いる磁気セパレーターの冷却液を再利用されます。 この練習は、環境に優しく経済性にも優を効果的に冷却、切削品質です。

(4)後処理:

切削後のコアとなる場合がガソリンの除去の残留冷却液体不純物を清潔かつ円滑にその後のプロセス。 

2. ワイヤーカット加工:

5

(1)主との利点:

 ワイヤー切断機を用い、金属線の電極を切り放電加工を実現します。 の主なメリットとしては、滑らかな切断面のストレスを最小限に抑え時に発生するのに適してい精密切削加工をコアとの特別な条件です。

wps20

(2)プロセスの制限:

(3) Case Study:

がワイヤーカットには、高精度、低ストレス、切削速度が遅いため、制限用量産には向かない。 通常、ワイヤーカットを使用forhigh精度の特殊な形状のコア加工などの研究試料や高性能トランスコアを用いた

(3)冷却および電極の維持管理

Szenario 中ワイヤーカット、冷却液体も温度低下の防止からの熱の影響材料。 維持thecleanliness張力の電極にワイヤーの重要な確保のための切ります。 要約すると、選択肢の中核切削プロセスに基づくべきである特定の生産ニーズ及び技術的条件です。ホイールの切断に適した大規模生産による効率と費用対効果をワイヤーカットに適forhigh精度の特殊な形状の加工が遅くなります。 方法の如何を問わず使用の適正を確保するためのコア固定、冷却、処理後も重要である切削品質および中核部門のパフォーマンス. Harmonic Suppression Principle Effect (THDv Reduction)
Industrial VFDs 4%-5% Distributed series + 5th harmonic filter Blocks 5th harmonic injection path 12% → 4%
Data Center UPS 14% Centralized series + 3rd harmonic filter Absorbs 3rd harmonic energy 10% → 2.5%
Solar Power Plants 5%-7% Busbar parallel + wideband filter Increases system impedance for wideband harmonics 9% → 3%
Commercial Buildings 6% Centralized at transformer outlet Suppresses multi-source harmonic overlap 7% → 3.8%

(2)工学的な範囲:(0.3~0.5)X_L@fᵣ

Harmonic control fundamentally revolves around “impedance matching” and “energy diversion.” Through precise reactor selection (reactance rate, insulation class) and systematic configuration (centralized/distributed, series/parallel), harmonics can be effectively suppressed while avoiding resonance risks. For international users, solutions must align with grid characteristics (short-circuit capacity, environmental conditions): low-reactance centralized configurations for high short-circuit capacity scenarios, while distributed filtering is ideal for precise suppression of characteristic harmonics. Looking ahead, with the rise of broadband active filters (AFE) and smart reactors, harmonic control will enter a new era of “adaptive” and “predictive” solutions.

Kontakt

電力の算出: single-phase transformer, three-phase-isolation in Transformatoren, elektrischen Transformator, Verteilung Transformator, step-down und step-up-Transformator, low-Spannung Transformator, hohe Spannung Transformator, Steuerung, Transformator, Ringkern Transformator, R-core-Transformator; DC-Spulen, AC Reaktoren, Filter-Reaktor -, line-und load reactor, drosseln, Filter-Reaktor, und die Mittel, hoch-Frequenz-Produkte.

がV_peak積の過電圧のピークとt_resに共鳴。 30%マージン推奨を占めるシステムパラメータ化します。

2.2.3の動的応答ソリューション 現代のシステム利用サイリスタ制御による抵抗減衰(TCRD)を検知する共鳴内10ms、配の正確性、切断中の通常の操作は避けます。.

3. 連携機構のアクティブフィルタ
WhatsApp:+86 13787095096
E-Mail: marketing@hnlsdz.com

WhatsApp QR WeChat QR sales@hnlsdz.com
Scroll to Top