FAQ

What is a steelmaking arc furnace transformer? A steelmaking arc furnace transformer is a special type of electric furnace transformer with various categories, including three-phase steelmaking arc furnace, three-phase ore-heating furnace, single-phase arc furnace, resistance furnace, salt bath furnace, single-phase graphitization furnace, medium-frequency induction furnace, and electric slag remelting furnace...

What is the voltage phase relationship of transformer windings? The voltage phase relationship of transformer windings refers to understanding the relationship of voltage phases between high, medium, and low voltage windings. This is typically the first consideration when studying the winding connections and configurations. In essence, it pertains to the...

Yyy connection：What are the characteristics ? The Yyy connection exhibits third harmonic voltage, but in three-phase three-legged core transformers, the third harmonic voltage does not exceed 5% of the fundamental. Therefore, it is suitable only for three-phase three-legged core medium to large transformers and cannot be used for three-phase five-legged...

Yyd and Ydd Connection : What are the characteristics? The Yyd connection is suitable for transformers with various core configurations, and its features include: (1) The adoption of d-shaped winding on the low-voltage side allows for the elimination of third harmonic voltage. (2) The d-shaped winding can serve as the...

How does humidity affect the operation of transformers? Relative humidity is expressed as a percentage at a certain temperature. At high temperatures, if the relative humidity is high, it is prone to the proliferation of mold. These molds may have adverse effects on the paint on the surface of the...

What are the impacts of wind speed on the operation of transformers? (Part 1) In the design and operation evaluation of power facilities, the maximum wind speed value within a certain period of time at a specific distance above the ground is usually clearly defined. For example, it is commonly...

Yd and Dy Winding Configurations: What are the characteristics? The Yd winding configuration is suitable for transformers with various core forms and features: a. The third harmonic current can circulate through the secondary side, eliminating the third harmonic voltage. b. The neutral point on the primary side can be grounded;...

What is the bonding process for the iron core? The core bonding process is a crucial step in transformer manufacturing, primarily aimed at enhancing the mechanical strength of the core, preventing the separation ofindividual laminations, and ensuring long-term stable performance. Especially in the post-annealing treatment of the core, the bonding...

What is the winding configuration of a transformer? ​ The combination of the connection methods for the high, medium, and low voltage windings of a transformer is referred to as the winding configuration. The winding configuration is crucial for the performance, manufacturing cost, and operational characteristics of the transformer. Common...

How is the heat treatment process for silicon steel cores? The heat treatment process ofsilicon steel cores is a crucial step to ensure theefficiency and longevity of transformers. During the manufacturing process, the magnetic properties of silicon steel cores can be compromised due to mechanical stresses such as shearing, drawing, and...

How is the lightning arrester protection implemented at the output terminals of the autotransformer? When installing lightning arresters, it is necessary to install them at the high-voltage and medium-voltage output terminals of the autotransformer. At this point, it is required that no disconnecting switch be placed between the output terminal and...

How can we understand the electrical phenomena of tracking and arcing, along with the related concepts of creepage distance and clearance distance? In the insulation design of electrical equipment,creepage and flashover are two common electrical phenomena that significantly impact the safety and reliability of the equipment. Understanding these phenomena and their...