What are the Causes and Prevention Methods for Positive Tolerance Exceeding on Both Sides of the Maximum Diameter of the Core？

Содержание

1.Cause Analysis

(1) Thickness Deviation During Core Stacking:

During the core stacking process, if the thickness of the laminations in each layer is generally thicker, it will directly result in the overall thickness and diameter of the core exceeding the specified tolerance. This typically occurs due toinconsistencies in lamination thickness during manufacturing or handling, or a lack of effective thickness control during stacking.

(2) Misalignment of Core Laminations:

If the laminations of the core exhibit significant left-right misalignment, it will lead to an irregular geometric shape of the core, causing the measurement of the maximum diameter to exceed the positive tolerance. This misalignment may be caused by inaccurate positioning or improper operation.

(3)  Inadequate Clamping of the Core:

After the core stacking is completed, if the core is not effectively clamped, it can deform or shift during subsequent processing or testing, thereby affecting measurement results and causing the measurements on both sides to exceed the positive tolerance.

2.Preventive Measures

(1) Strict Control of Core Stacking Thickness:

During core stacking, the thickness of each layer of laminations must be strictly controlled. Typically, the thickness tolerance of each core layer is required to be±0.5mm, and positive tolerance is not allowed to occur simultaneously in three consecutive layers. This can be achieved by regularly calibrating the thickness measuring tools for laminations, optimizing the lamination manufacturing process, and implementing stringent quality control measures during stacking.

(2) Ensuring Symmetry of Core Laminations:

During the core stacking process, strict control over the symmetry of the laminations on both sides of each layer is necessary. Precise positioning devices and alignment tools should be used to ensure that each layer of laminations is accurately aligned toprevent left-right misalignment. This can be accomplished by optimizing the positioning and alignment process of the laminations and regularly checking and adjusting for symmetry.

(3) Adequate Clamping and Improved Binding Process for the Core:

After the core stacking is completed, the core should be adequately clamped immediately to prevent deformation during processing or testing. The accuracy of the core binding process should be improved by using appropriate clamping tools and binding materials, ensuring that the core does not bulge after binding. Regular inspections of the clamping equipment are necessary to ensure its proper functioning, and the binding process should be monitored and adjusted to prevent uneven clamping or looseness.

Подводя итог

By implementing the aforementioned measures, the issue of positive tolerance exceeding the measurements on both sides of the core’s maximum diameter can be effectively prevented, ensuring that the geometric dimensions of the core meet design requirements, thereby enhancing the performance and reliability of the transformer.

Контакты

Компания LuShan, основанная в 1975 году, является китайским профессиональным производителем, специализирующимся на силовых трансформаторах и реакторах более 50 лет. Ведущими продуктами являются однофазный трансформатор, трехфазные изолирующие трансформаторы, электрический трансформатор, распределительный трансформатор, понижающий и повышающий трансформаторы, низковольтный трансформатор, высоковольтный трансформатор, управляющий трансформатор, тороидальный трансформатор, R-образный трансформатор; катушки индуктивности постоянного тока, реакторы переменного тока, фильтрующий реактор, линейный и нагрузочный реакторы, дроссели, фильтрующий реактор и промежуточные высокочастотные продукты.

Наши силовые трансформаторы и реакторы широко используются в 10 областях применения: скоростной транспорт, строительная техника, возобновляемые источники энергии, интеллектуальное производство, медицинское оборудование, предотвращение взрывов в угольных шахтах, системы возбуждения, вакуумные печи спекания, центральное кондиционирование воздуха.

Узнайте больше о силовом трансформаторе и реакторе: www.lstransformer.com.

Если вы хотите получить индивидуальные решения для трансформаторов или реакторов, пожалуйста, свяжитесь с нами.
WhatsApp: +86 13787095096
Электронная почта: marketing@hnlsdz.com